Electric Avenue PNW is headquartered in Canby. Our shop sits at 138 S Hazel Dell Way, Ste 112, a five-minute drive from the Main Street historic district and the Canby Ferry landing. Jack Marquardt (Master Electrician, Oregon CCB# 248553) lives here, raised his kids here, and works here every week. When you call a Canby electrician, you’re calling the truck that’s already in town.
Whether you own a Main Street craftsman, a 1960s home off NW 4th, a Knights Bridge area property, a farmhouse out toward Barlow, or a newer build in Willow Creek, we wire it right. Most Canby calls we can get to the same week. On-site assessment. Permits filed. No travel surcharge in our home town.
Need an electrician in Canby today?
We’re based here. Site assessment, permits filed, same-week scheduling for most jobs. 24/7 emergency line.
Electrical Services in Canby
Panel Upgrades
100A to 200A upgrades. FPE Stab-Lok and Zinsco replacement for older Canby homes off NW and SE 4th.
EV Charger Installation
Level 2 home charging for Tesla, Rivian, Ford, and universal NEMA 14-50. Permit included.
Generator Installs
Standby generators sized for Clackamas County ice-storm and windstorm outages. Generac, Kohler, Briggs.
Whole-House Rewiring
Knob-and-tube remediation in older Canby cottages, aluminum branch wiring replacement, full modern overhauls.
24/7 Emergency
Burning smell, sparking outlet, panel failure, PGE service drop down? Call any hour. We answer.
Commercial, Farm & ADU
Main Street tenant improvements, restaurant wiring, dairy and farm circuits, well pumps, shop and ADU electrical.
Canby Electrical Reality
Canby is where I live and where I built this company, so I know the housing stock here block by block. The town has a wider range of construction eras than most people realize: pre-1920 farmhouses and Main Street homes, post-war infill from the 1950s, big tract waves in the 70s and 80s, and the steady newer-build growth on the south and west sides into the 2000s and 2010s. Outside the city limits you’ve got dairy land, hazelnut orchards, and rural residential off Lone Elder, Mulino Road, and Barlow that all fall under Clackamas County jurisdiction rather than the city. Each one needs a different approach.
Common Canby Service Calls
Main Street and downtown bungalows (pre-1940): Knob-and-tube wiring behind plaster, undersized 60A or 100A services, and panels that can’t carry modern HVAC plus heat pump plus EV charger loads. Whole-home rewires done carefully so the historic woodwork and trim stays intact.
1960s and 70s tract homes off NW and SE 4th: Federal Pacific Stab-Lok and Zinsco panels are everywhere in this stock. Insurance non-renewal letters have been steady around town. We replace panels with PGE coordination, file through the Canby Building Department, and provide the remediation letter your insurer wants.
Knights Bridge and Willow Creek: Newer construction with 100A or 125A panels that were never sized for a hot tub plus heat pump plus Level 2 charger plus shop. Service upgrade plus a properly laid-out 200A panel solves the load problem and gives you room to grow.
Rural Clackamas County (Lone Elder, Mulino Road, Barlow): Farm panels, well pumps, irrigation circuits, shop and outbuilding power, ADU electrical for guest houses. Permits go through Clackamas County Building Codes rather than the city. We pull them, wire to NEC, and coordinate with PGE for any new service drops.
Ferry-side and historic homes near the Willamette: Older grid, plenty of original cloth-jacketed wiring still in service, and the kind of slow-growth electrical patchwork that needs a real evaluation before you start adding loads. We do honest assessments here, not scare-tactic upsells.
This is our home town. My kids went through Trost Elementary and Knight Elementary — we sponsored the most recent Jog-A-Thon at one of them and we’ll keep doing that as long as we’re in business. When the February 2021 ice storm hit, we were out reconnecting masts and meter bases for neighbors before the trucks could get through. We know the PGE pole maintenance pattern around town, we know which subdivisions have buried service and which have overhead, and we’ll never quote you a Canby job like we just looked it up on a map.
Permits and Local Coordination
For addresses inside Canby city limits, electrical permits go through the Canby Building Department right downtown. For rural addresses outside the city (Lone Elder, Mulino Road, Barlow, and the unincorporated stretches), permits go through Clackamas County Building Codes in Oregon City. We confirm jurisdiction at the site visit, file every permit, coordinate rough-in and final inspections, and handle the PGE disconnect and reconnect appointments for service-equipment work. Because we’re based right here, the trip to the city counter is a five-minute drive for us.
Standard service work (panel replacements, EV charger circuits, generator transfer switches) typically clears permit review in 3–10 business days. PGE service-drop coordination adds another 1–3 weeks depending on whether utility infrastructure needs review. We give you a real timeline at the site assessment, not an optimistic one.
On-site assessment in Canby
We’re already in town. We drive out, look at your panel and your project, run the load calc, and give you a real number.
Our Promise to Canby
Hometown standards. No fine print, no upsells, no surprises. Here’s what every Canby customer gets.
- On-site assessment. We drive out, run the NEC load calc, and give you a real number. No pressure, no obligation.
- Permits filed for you. Every job, every time. Canby Building Department or Clackamas County, plus PGE coordination. The bureaucracy is on us.
- Hometown crew. Same Oregon CCB# 248553 team that’s earned 235+ five-star reviews across the Portland metro, based right here at 138 S Hazel Dell Way.
- Insurance letter included on every panel replacement. We email it straight to your underwriter so your policy stays active.
- 24/7 emergency line. Burning smell, sparking, panel failure, downed service drop, we answer any hour, any day.
- No upsells. If your existing panel can carry the load, we’ll tell you. Honest load calc, honest quote, neighbor to neighbor.
Frequently Asked Questions
How fast can you get out to a Canby address?
Faster than anywhere else. Our shop is on South Hazel Dell Way, so most Canby calls we can be at within the same day for emergencies, and we can usually schedule a non-emergency site assessment within 2–4 days. Install windows typically run 1–2 weeks depending on permit review and PGE coordination.
Do permits go through Canby or Clackamas County?
It depends on your exact address. Inside Canby city limits, electrical permits go through the Canby Building Department downtown. For addresses outside the city in unincorporated Clackamas County (Lone Elder, Mulino Road, Barlow, and the rural stretches), permits go through Clackamas County Building Codes in Oregon City. We confirm jurisdiction at the site visit and file accordingly.
How much does a panel upgrade cost in Canby?
In 2026, a direct FPE or Zinsco panel swap to a modern panel at the same amperage runs $1,800–$3,000 in Canby. A full 100A–to–200A service upgrade with new meter base and PGE coordination runs $3,500–$6,000. Because we’re based in Canby, there’s no out-of-area travel charge. On-site assessment for an exact quote.
Do you do farm and outbuilding electrical?
Yes. We do farm panels, dairy circuits, well pumps, irrigation, shop and outbuilding power, and ADU electrical for guest houses on rural Clackamas County properties. We pull county permits, wire to NEC, and coordinate with PGE for any new service drops.
Are you really based in Canby, or is this just a service area page?
Really based here. Our shop is at 138 S Hazel Dell Way, Ste 112, Canby, OR 97013. Jack lives in town. We sponsor the local elementary Jog-A-Thon, our trucks park in Canby every night, and most of our crew either lives here or in the adjacent towns. When you call us for a Canby job, you’re getting your neighbor, not a dispatch from Portland.
Book Your Canby Site Assessment
Licensed under Oregon CCB# 248553. Veteran, woman, and minority owned. 235+ five-star reviews. Headquartered at 138 S Hazel Dell Way, Ste 112, Canby. We file every permit, coordinate PGE, and stand behind every install. Call now for same-week scheduling on most projects.